TF1260 Open File Release

[terriblefire]

Hi folks,

Since the price gougers are now out on ebay and we've reached our shipping number goal. Here is the open file Gerber release of the TF1260 Revision 1e. There are minor minor differences compared to rev1c and rev1d but all of them should work with the same firmwares. I strongly recommend doing a small batch first before ordering 50 pieces etc.

I recommend JLCPCB and i recommend using the BOM and CPL files included. No support is given for this release at all. ever. Good luck. If your boardhouse cannot do the DRC that i've designed the board to then tough. Your boardhouse sucks.

Word of warning. If you think you will make these cheaper than @alenppc, @supaduper or @chucky then you'll probably be disappointed. These have been run very close to cost all the way along.

Firmware is the same as the beta firmware elsewhere on the forum or use the alpha.

The CPLDs are both XC95288XLs. I'll add the remaining BOM on here in due course.

If you build this and feel like donating to future TF projects then my paypal is stephen at terriblefire.com ... this is purely voluntary.

https://locator.reamiga.info/locator.php?project=TF1260

License is Creative Commons, Attribution, No Derivatives, No AmigaKit. If you sell a board you must support it. If you sell a blank PCB you must support the builder. You are liable for that support even if you list on your sale that no support is offered.

NOTE: You will need some kind of 3.3v Regulator/SMPSU. This is not in the BOM.

EDIT: This post will continue to be updated as I get feedback... but really you will not make it cheaper doing this and i really dont care if it doesnt work for you.

[PhilC]

thank you @terriblefire. Out of interest, how many are already out there in the wild?

[terriblefire]

thank you @terriblefire. Out of interest, how many are already out there in the wild?

Around 500. Not all of them were sold... many were given away.

[PhilC]

Around 500. Not all of them were sold... many were given away.

Well, nicely done Sir.

[arkadiusz.makarenko]

I didn't expect that!

If someone will be doing PCB orders in UK, I would like to buy one.

[screemo]

Good work Stephen - you did a mighty fine board with the 1260. I'm so glad you are still here despite all history

[BytexVoid]

I have one in my 1200, best purchase I ever made (together with a rev1 CPU for 200 bucks). Thank you so much

[dalek]

Legend!

[go0se]

为什么我们突然收到这么多相同的订单！？

[chucky]

为什么我们突然收到这么多相同的订单！？

LOL!