Just working on Tony's Falcon.
We are doing:
- PSU recap
- Falcon motherboard re-cap
- Reverse old clock patch
- Exxos clock buffer
- Exxos NVRAM
- Exxos RAM board
- Install FPU
- Install Fast TOS 4.04
- Disable wait states
- Install Openflops drive
Just checking to make sure it's working as expected to begin with
There are two types of NVRAM on a falcon, the ST branded NVRAM is easier to remove because its legs are visible on the topside, so much easier to use solder wick and the heat gun
A quick clean up with solder wick
Socket installed
NVRAM installed
Fast TOS 4.04 installed so we can later disable the motherboards wait states