TF1260 Open File Release

Help & news on accelerators from TF, Amiga, Atari, CD32 etc

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Moderator Team
Moderator Team
Posts: 5450
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

TF1260 Open File Release

Post by terriblefire »

Hi folks,

Since the price gougers are now out on ebay and we've reached our shipping number goal. Here is the open file Gerber release of the TF1260 Revision 1e. There are minor minor differences compared to rev1c and rev1d but all of them should work with the same firmwares. I strongly recommend doing a small batch first before ordering 50 pieces etc.

I recommend JLCPCB and i recommend using the BOM and CPL files included. No support is given for this release at all. ever. Good luck. If your boardhouse cannot do the DRC that i've designed the board to then tough. Your boardhouse sucks.

Word of warning. If you think you will make these cheaper than @alenppc, @supaduper or @chucky then you'll probably be disappointed. These have been run very close to cost all the way along.

Firmware is the same as the beta firmware elsewhere on the forum or use the alpha.

The CPLDs are both XC95288XLs. I'll add the remaining BOM on here in due course.

If you build this and feel like donating to future TF projects then my paypal is stephen at terriblefire.com ... this is purely voluntary.

https://locator.reamiga.info/locator.php?project=TF1260

License is Creative Commons, Attribution, No Derivatives, No AmigaKit. If you sell a board you must support it. If you sell a blank PCB you must support the builder. You are liable for that support even if you list on your sale that no support is offered.

NOTE: You will need some kind of 3.3v Regulator/SMPSU. This is not in the BOM.

EDIT: This post will continue to be updated as I get feedback... but really you will not make it cheaper doing this and i really dont care if it doesnt work for you.
Attachments
tf1260_full_bom.csv
(2.34 KiB) Downloaded 833 times
tf1260_public_v0.2.zip
(442.78 KiB) Downloaded 910 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6072
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF1260 Open File Release

Post by PhilC »

thank you @terriblefire. Out of interest, how many are already out there in the wild?
If it ain't broke, test it to Destruction.
terriblefire
Moderator Team
Moderator Team
Posts: 5450
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1260 Open File Release

Post by terriblefire »

PhilC wrote: Thu Oct 21, 2021 11:38 am thank you @terriblefire. Out of interest, how many are already out there in the wild?
Around 500. Not all of them were sold... many were given away.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
PhilC
Moderator
Moderator
Posts: 6072
Joined: Fri Mar 23, 2018 8:22 pm

Re: TF1260 Open File Release

Post by PhilC »

terriblefire wrote: Thu Oct 21, 2021 11:38 am
Around 500. Not all of them were sold... many were given away.
Well, nicely done Sir.
If it ain't broke, test it to Destruction.
User avatar
arkadiusz.makarenko
Moderator Team
Moderator Team
Posts: 1208
Joined: Wed Jun 19, 2019 7:36 am
Location: Edinburgh

Re: TF1260 Open File Release

Post by arkadiusz.makarenko »

I didn't expect that!

If someone will be doing PCB orders in UK, I would like to buy one.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
screemo
Posts: 7
Joined: Thu Nov 22, 2018 11:49 am

Re: TF1260 Open File Release

Post by screemo »

Good work Stephen - you did a mighty fine board with the 1260. I'm so glad you are still here despite all history ;)
BytexVoid
Posts: 1
Joined: Thu Oct 21, 2021 1:17 pm

Re: TF1260 Open File Release

Post by BytexVoid »

I have one in my 1200, best purchase I ever made (together with a rev1 CPU for 200 bucks). Thank you so much :)
dalek
Posts: 226
Joined: Thu Nov 08, 2018 11:03 am
Location: NSW Australia

Re: TF1260 Open File Release

Post by dalek »

Legend! :dualthumbup: :dualthumbup: :dualthumbup: :thanksyellow:
go0se
Posts: 405
Joined: Sun Nov 25, 2018 7:55 pm

Re: TF1260 Open File Release

Post by go0se »

为什么我们突然收到这么多相同的订单!?
chucky
Posts: 95
Joined: Sun Jan 13, 2019 8:42 pm

Re: TF1260 Open File Release

Post by chucky »

go0se wrote: Thu Oct 21, 2021 2:25 pm 为什么我们突然收到这么多相同的订单!?
LOL!
Post Reply

Return to “Terriblefire's channel”