Floppy un-flip cable adapter

The latest tweaks and fixes to keep your machine running in tip-top shape.
Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Floppy un-flip cable adapter

Post by exxos »

IMG_6066.JPG
IMG_6066.JPG (279.14 KiB) Viewed 4591 times

The purpose of this board is to alleviate the problem of having to physically twist the cable and using a more modern MPF920 1.44mb floppy drive. It also solves the problem of having to dismantle the drive to alter the drive ID select such as shown HERE. You can simply drop in a PC drive and it will work! also as noted HERE in the mandatorily fixes that the 1772 needs pull-up resistors to function correctly and these are also included on this board! So you no longer have to do but resistors on top of the inverter chip as it is all included on board!


NOTE - While you can use a 1.44 floppy drive, this board does not add 1.44 support. You need a kit like THIS ONE to add support for 1.44 floppies.

NOTE - This board is intended to use the MPF920 drive only. In theory any drive should work, but the physical location of the power connector will likely be a issue. As such, I do not officially support any drives but the MPF920.

NOTE - You have to pass the power through the board because the resistors need the 5 V rail for the pullups to work.. So you cannot simply connect the power direct to the floppy drive as before.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Floppy un-flip cable adapter

Post by exxos »

THE KIT

1 PCB populated with SMT pull up resistors. 2 x connectors.

kit1.jpg
kit1.jpg (90.76 KiB) Viewed 4571 times


STORE LINK

https://www.exxosforum.co.uk/atari/store2/#0208
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Floppy un-flip cable adapter

Post by exxos »

INSTALL GUIDE

MPF920 is the drive which should be used and is available in my store HERE

Place a tough piece of card or ideally thin plastic as illustrated below. The strip should go a little more to the left than illustrated in the image, to go over the PSU connector as well.

1.jpg
1.jpg (157.8 KiB) Viewed 4566 times
3.jpg
3.jpg (121.5 KiB) Viewed 4560 times

Cut your floppy power lead Leaving about 1 inch of wire still connected to the connector itself. Then strip and tin the wires as illustrated below.

IMG_6063.JPG
IMG_6063.JPG (397.44 KiB) Viewed 4566 times

Solder the connectors as illustrated below.

The other black connector solders on the back of the PCB, forgot to take a image sorry!

2.jpg
2.jpg (375.82 KiB) Viewed 4563 times

Solder the motherboard power cable as shown below..

IMG_6065.JPG
IMG_6065.JPG (322.31 KiB) Viewed 4563 times

Then simply plug it all in and done!

IMG_6069.JPG
IMG_6069.JPG (272.63 KiB) Viewed 4563 times
IMG_6068.JPG
IMG_6068.JPG (249.32 KiB) Viewed 4563 times
IMG_6066.JPG
IMG_6066.JPG (279.14 KiB) Viewed 4563 times


STE MODIFICATION

The STE has DRIVE B: select on the internal cable, so pin 12 track needs to be cut... (track is the one which goes to the via hole)

IMG_6071.JPG
IMG_6071.JPG (401.72 KiB) Viewed 4493 times
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
DaveC
Posts: 125
Joined: Fri Sep 18, 2020 6:24 pm

Re: Floppy un-flip cable adapter

Post by DaveC »

Think the only issue I can think of this this is for those of us with an STe (or other systems with both drive selects on the internal cable), who'll no longer get asked to insert disk B: into drive A:
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Floppy un-flip cable adapter

Post by exxos »

DaveC wrote: Tue Jan 12, 2021 7:15 am Think the only issue I can think of this this is for those of us with an STe (or other systems with both drive selects on the internal cable), who'll no longer get asked to insert disk B: into drive A:
Never thought of drive B being on the same cable...
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Floppy un-flip cable adapter

Post by exxos »

Oh the fekers it does have B: select on the STE pin 12 :roll: ..

Capture.PNG
Capture.PNG (34.28 KiB) Viewed 4504 times

Doesn't on the STFM..

2.PNG
2.PNG (143.84 KiB) Viewed 4502 times

EDIT2:

So on the STE, I verified that the contents of B: were reading from A: . So that would be a issue on the STE.. so I will cut the track..

EDIT3:

Yeah that was the problem!
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
theSPY
Posts: 3
Joined: Sat Jun 08, 2024 10:25 pm

Re: Floppy un-flip cable adapter

Post by theSPY »

Does the Falcon also need the cable flipper to use the MPF920 drive ?
User avatar
exxos
Site Admin
Site Admin
Posts: 24653
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:

Re: Floppy un-flip cable adapter

Post by exxos »

theSPY wrote: Mon Jul 01, 2024 11:22 am Does the Falcon also need the cable flipper to use the MPF920 drive ?
The falcon already uses a 1.44 drive, the "flip" is because of moving from 720K to 1.44 drives.
https://www.exxosforum.co.uk/atari/ All my hardware guides - mods - games - STOS
https://www.exxosforum.co.uk/atari/store2/ - All my hardware mods for sale - Please help support by making a purchase.
viewtopic.php?f=17&t=1585 Have you done the Mandatory Fixes ?
Just because a lot of people agree on something, doesn't make it a fact. ~exxos ~
People should find solutions to problems, not find problems with solutions.
Post Reply

Return to “TWEAKS & FIXES”