Hey Folks,
I see various IDE buffers being sold around the traps, for what seems to be exorbitant prices. Is there any Open Source alternatives out there?
Happy to start with just a schematic as I'm happy to use KiCAD to produce an actual board...
Primarily targeting the A1200 internal IDE header...
Chesh
Is there an open source IDE buffer?
Moderators: terriblefire, Terriblefire Moderator
Re: Is there an open source IDE buffer?
Inline buffer based on Terriblefire's TF536 layout.
Kicad 6 project attached.
Use in conjunction with 5cm cable on the unbuffered side to your card/motherboard + longer cable on the buffered side to your IDE adapter.
Kicad 6 project attached.
Use in conjunction with 5cm cable on the unbuffered side to your card/motherboard + longer cable on the buffered side to your IDE adapter.
- Attachments
-
- AMIGA_IDE_BUFFER.zip
- (679.3 KiB) Downloaded 137 times
-
- Posts: 34
- Joined: Sat May 25, 2019 5:24 am
Re: Is there an open source IDE buffer?
Sir, I salute you!
Thank you (And, of course TerribleFire) for this.
Cheers!
Chesh
Thank you (And, of course TerribleFire) for this.
Cheers!
Chesh
Re: Is there an open source IDE buffer?
@go0seCheshire Noir wrote: ↑Sun Apr 03, 2022 5:35 am Sir, I salute you!
Thank you (And, of course TerribleFire) for this.
Cheers!
Chesh
what he said!
Amiga A1200, TF1230 & TF1260 owner. Thankyou TerribleFire
20211017: Bought my first ST, Atari 520STfm C070859-001 Rev.2 (NOT Rev 2.0)
20220401: Bought my first STE, Atari 1040STe
20211017: Bought my first ST, Atari 520STfm C070859-001 Rev.2 (NOT Rev 2.0)
20220401: Bought my first STE, Atari 1040STe