TF4060 Revision 1 Design Complete

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

User avatar
Timtheloon
Posts: 5
Joined: Sun Jul 03, 2022 9:21 am
Location: UK, Hampshire
Contact:

Re: TF4060 Revision 1 Design Complete

Post by Timtheloon »

Another TF addition I am looking forward too.

I love my 060 accelerators but getting them fixed when they break is a nightmare and usually not acheviable if the CPLD's have screwed up, at least with these there is good support at the mo.
terriblefire
Moderator Team
Moderator Team
Posts: 5001
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF4060 Revision 1 Design Complete

Post by terriblefire »

The plan for this card is to get on with it once the TF360 is sorted and latest 1260 fw is out, I'm very close
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
shaf
Posts: 4
Joined: Mon Dec 24, 2018 5:29 pm

Re: TF4060 Revision 1 Design Complete

Post by shaf »

I've been waiting for you to do A4000 Cards, count me in for Getting one.
iconicbits
Posts: 1
Joined: Wed May 25, 2022 2:02 pm

Re: TF4060 Revision 1 Design Complete

Post by iconicbits »

Looking forward to this too - I went ahead and got a "cheap" rev 1 060 so I can swap out the rev 6 on an A3660 and use it for the TF4060.
MarkT
Posts: 2
Joined: Sat Jul 30, 2022 3:24 pm

Re: TF4060 Revision 1 Design Complete

Post by MarkT »

Hi. I'm new to the forum and have joined specifically because of my interest in the TF4060 and TF360 projects. I've even sourced a couple of CPUs in anticipation!

I'm a bit confused about how to go about acquiring a board when the design is ready for release. I've obviously seen TF1260s and 1230s for sale from the usual Amiga retailers, but there have been comments about the 4060 and 360 only being made by "selected builders" in small batches. How do you make contact, get in the queue, make payment, etc. please? Can I pay a deposit to secure my place?

Sorry for what may be silly questions: I've only recently come back to the Amiga after about 20 years and I'm still finding my feet with this stuff. All the new small-scale hardware projects are fantastic, and I have some cash that I want to splash in their support :)
terriblefire
Moderator Team
Moderator Team
Posts: 5001
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF4060 Revision 1 Design Complete

Post by terriblefire »

Design complete means I’ve ordered a board and I’m working on making it functional.

When it’s actually working Chucky, AlenPPC et al will be offering boards here and Amibay.

We’ve working a huge amount on the TF360 in the last 6 months and haven’t got the results we’d hoped for . I did a bit of an explanation on my recent YT live stream
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
MarkT
Posts: 2
Joined: Sat Jul 30, 2022 3:24 pm

Re: TF4060 Revision 1 Design Complete

Post by MarkT »

Thanks for the super-fast response. I was just trying to establish where to keep an eye out for them.

I was trying to avoid Amibay tbh...the 'unique' transaction systems/rules were putting me off, and then I found I couldn't even register anyway. That seems to be fixed now, so looks like I'll be off there shortly to make an account!
terriblefire
Moderator Team
Moderator Team
Posts: 5001
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF4060 Revision 1 Design Complete

Post by terriblefire »

Just keep an eye on this forum or sub to my YT Channel and I’ll make an announcement when it’s ready
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF360”