TF1230

Help & news on accelerators from TF, Amiga, Atari, CD32 etc

Moderators: terriblefire, Terriblefire Moderator

Post Reply
thecaver99
Posts: 56
Joined: Tue Sep 01, 2020 7:18 pm

TF1230

Post by thecaver99 »

might be a daft question but how do i find my serial number for the tf1230 and see if there has been any update to the firmware?

i don't have any fleshing hardware/software as yet but will pick some up to keep the card upto date.
User avatar
kulamario
Posts: 237
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: TF1230

Post by kulamario »

only the tf1260 cards built by the builders had serial
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230

Post by terriblefire »

thecaver99 wrote: Mon Mar 07, 2022 9:34 am might be a daft question but how do i find my serial number for the tf1230 and see if there has been any update to the firmware?

i don't have any fleshing hardware/software as yet but will pick some up to keep the card upto date.
There is no software control or serial numbers in the TF1230. Its considerably simpler than the 1260.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
thecaver99
Posts: 56
Joined: Tue Sep 01, 2020 7:18 pm

Re: TF1230

Post by thecaver99 »

thanks that makes things a little easier,

how can we tell what the firmware is on the 1230, is there anywhere that has the latest updated to download so can be flashed to update the TF1230
alenppc
Moderator Team
Moderator Team
Posts: 906
Joined: Thu Nov 08, 2018 12:59 pm

Re: TF1230

Post by alenppc »

thecaver99 wrote: Tue May 31, 2022 10:04 am thanks that makes things a little easier,

how can we tell what the firmware is on the 1230, is there anywhere that has the latest updated to download so can be flashed to update the TF1230
The only way to know is to ask your builder what they flashed it with.
DaveEddie
Posts: 3
Joined: Mon Jul 04, 2022 10:45 pm

Re: TF1230

Post by DaveEddie »

Hi all. Newbie question. I just bought a bog standard A1200 from ebay. Workbench 3.0 and KS 3.0.
I looked into upgrading it and have bought a TF1230 accelerator card. It has 128mb fast ram. A modified kickstart ks3.1, and an RTC. I'm not sure but does the modified ks3.1 rom mean I don't need to buy a set of 3.1 rom chips?
Thankyou for your help in advance.
Dave
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230

Post by terriblefire »

DaveEddie wrote: Mon Jul 04, 2022 11:01 pm Hi all. Newbie question. I just bought a bog standard A1200 from ebay. Workbench 3.0 and KS 3.0.
I looked into upgrading it and have bought a TF1230 accelerator card. It has 128mb fast ram. A modified kickstart ks3.1, and an RTC. I'm not sure but does the modified ks3.1 rom mean I don't need to buy a set of 3.1 rom chips?
Thankyou for your help in advance.
Dave
Need to check. You say you have KS3.0 and KS3.1. Which one do you have? Without knowing more about what the modifications are its hard to know if you need a new rom set.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
DaveEddie
Posts: 3
Joined: Mon Jul 04, 2022 10:45 pm

Re: TF1230

Post by DaveEddie »

Thanks for your reply. I have ks3.0 on my MB. The TF1230 comes with a modified ks3.1. I realise I need to install workbench 3.1. But I don't know if I need new 3.1 chips on my MB for the card to work or can I just boot up straight from the card controller?
I looked for support on the amigastore.eu website but the link is dead.
terriblefire
Moderator Team
Moderator Team
Posts: 5368
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: TF1230

Post by terriblefire »

DaveEddie wrote: Tue Jul 05, 2022 12:05 am Thanks for your reply. I have ks3.0 on my MB. The TF1230 comes with a modified ks3.1. I realise I need to install workbench 3.1. But I don't know if I need new 3.1 chips on my MB for the card to work or can I just boot up straight from the card controller?
The card will start with all these roms but...

KS3.0 will not find your fastmem. If you insist on using it you will need to manually add the fastram with the addmem command.

http://aminet.net/util/cli/AddMem.lha

A plain KS3.1 is fine but there will be no support for the TF1230 IDE interface at boot.

So basically use the roms that came with the card. It will give you the best support.
DaveEddie wrote: Tue Jul 05, 2022 12:05 am I looked for support on the amigastore.eu website but the link is dead.
The forum recently moved.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
DaveEddie
Posts: 3
Joined: Mon Jul 04, 2022 10:45 pm

Re: TF1230

Post by DaveEddie »

Thankyou for your help. Still waiting for it to arrive so i'll see how it goes.
Post Reply

Return to “Terriblefire's channel”