TF1260 Open File Release
Posted: Thu Oct 21, 2021 11:35 am
Hi folks,
Since the price gougers are now out on ebay and we've reached our shipping number goal. Here is the open file Gerber release of the TF1260 Revision 1e. There are minor minor differences compared to rev1c and rev1d but all of them should work with the same firmwares. I strongly recommend doing a small batch first before ordering 50 pieces etc.
I recommend JLCPCB and i recommend using the BOM and CPL files included. No support is given for this release at all. ever. Good luck. If your boardhouse cannot do the DRC that i've designed the board to then tough. Your boardhouse sucks.
Word of warning. If you think you will make these cheaper than @alenppc, @supaduper or @chucky then you'll probably be disappointed. These have been run very close to cost all the way along.
Firmware is the same as the beta firmware elsewhere on the forum or use the alpha.
The CPLDs are both XC95288XLs. I'll add the remaining BOM on here in due course.
If you build this and feel like donating to future TF projects then my paypal is stephen at terriblefire.com ... this is purely voluntary.
https://locator.reamiga.info/locator.php?project=TF1260
License is Creative Commons, Attribution, No Derivatives, No AmigaKit. If you sell a board you must support it. If you sell a blank PCB you must support the builder. You are liable for that support even if you list on your sale that no support is offered.
NOTE: You will need some kind of 3.3v Regulator/SMPSU. This is not in the BOM.
EDIT: This post will continue to be updated as I get feedback... but really you will not make it cheaper doing this and i really dont care if it doesnt work for you.
Since the price gougers are now out on ebay and we've reached our shipping number goal. Here is the open file Gerber release of the TF1260 Revision 1e. There are minor minor differences compared to rev1c and rev1d but all of them should work with the same firmwares. I strongly recommend doing a small batch first before ordering 50 pieces etc.
I recommend JLCPCB and i recommend using the BOM and CPL files included. No support is given for this release at all. ever. Good luck. If your boardhouse cannot do the DRC that i've designed the board to then tough. Your boardhouse sucks.
Word of warning. If you think you will make these cheaper than @alenppc, @supaduper or @chucky then you'll probably be disappointed. These have been run very close to cost all the way along.
Firmware is the same as the beta firmware elsewhere on the forum or use the alpha.
The CPLDs are both XC95288XLs. I'll add the remaining BOM on here in due course.
If you build this and feel like donating to future TF projects then my paypal is stephen at terriblefire.com ... this is purely voluntary.
https://locator.reamiga.info/locator.php?project=TF1260
License is Creative Commons, Attribution, No Derivatives, No AmigaKit. If you sell a board you must support it. If you sell a blank PCB you must support the builder. You are liable for that support even if you list on your sale that no support is offered.
NOTE: You will need some kind of 3.3v Regulator/SMPSU. This is not in the BOM.
EDIT: This post will continue to be updated as I get feedback... but really you will not make it cheaper doing this and i really dont care if it doesnt work for you.
