Microdeal clock software

Post your for sale or wanted retro related wares in this section.
Post Reply
UnderTheRain
Posts: 152
Joined: Sat Apr 03, 2021 2:08 am

Microdeal clock software

Post by UnderTheRain »

Hi does anyone by any chance have the software for the microdeal rtc clock cartridge? I did see one other thread saying someone had it but that was from 2011.

Thanks

Brian
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: Microdeal clock software

Post by DoG »

I have this cartridge unit with box, manual and disk and I have thought about archiving it, but never got around doing it. So thank you for giving me a boot in the a** and get going.

I was a bit worried about the disk though, I cleaned a few black spots I could find on the surface before I put it the drive. I used ParCPUSB unit over USB just to try and copy the files and that went great. So I also used JayMSA v1.08 and MSA v1.41 to get the disk to file. JayMSA seemed a bit better since it could avoid unused clusters. It seemed it was only single side but the MSA programs said it was 2 sides. Converted it to ST-files as well. Is the manual out there somewhere or should I make a PDF and upload that too? And the box?

microdeal clock card file copy.zip
(8.43 KiB) Downloaded 59 times
mdealclk_msa141.zip
(16.2 KiB) Downloaded 65 times
mdealclk_jaymsa108.zip
(16.78 KiB) Downloaded 71 times
microdeal clock card disk photo.zip
(2.25 MiB) Downloaded 68 times


disk_top.jpg
disk_top.jpg (315.49 KiB) Viewed 2191 times
UnderTheRain
Posts: 152
Joined: Sat Apr 03, 2021 2:08 am

Re: Microdeal clock software

Post by UnderTheRain »

Dude you are a freaking legend thank you so much for this I just purchased the cart on eBay I'm sure I'll have to make a PCB to replace the battery with a coin cell but that's just extra fun 🙂

Thank you

Brian
UnderTheRain
Posts: 152
Joined: Sat Apr 03, 2021 2:08 am

Re: Microdeal clock software

Post by UnderTheRain »

I couldn't find the manual of you could upload it that would be amazing.

Thanks again

Brian
User avatar
DoG
Posts: 1125
Joined: Sat Apr 07, 2018 12:26 pm

Re: Microdeal clock software

Post by DoG »

Since I don't have a scanner I just took photos with my phone and combine it to a pdf. So it is not great. Photo of registration card and box in the other zip.

microdeal clock card manual.zip
(6.44 MiB) Downloaded 68 times
microdeal clock card box and reg card.zip
(5.61 MiB) Downloaded 67 times
UnderTheRain
Posts: 152
Joined: Sat Apr 03, 2021 2:08 am

Re: Microdeal clock software

Post by UnderTheRain »

Thank you very that's awesome

Regards

Brain
Post Reply

Return to “GENERAL FOR SALE & WANTED”