PLCC 'plug' backing spring

The place to discuss & share your 3D models or printable parts!
User avatar
Badwolf
Posts: 2228
Joined: Tue Nov 19, 2019 12:09 pm

Re: PLCC 'plug' backing spring

Post by Badwolf »

Just a quick follow up on this. Haven't had a chance to revisit this in video form yet.

These, whilst nice and tight initially, didn't last long with PLA. Probably only a couple of weeks of presure before they relaxed into their compressed state.

A slightly oversized plastic plug and dremmel it until it fits nicely in a candiate socket was the final solution I adopted.

Too many things to work on, too little time, but these experments should be considered a null result unless you're printing in nylon or something.

BW
DFB1 Open source 50MHz 030 and TT-RAM accelerator for the Falcon
DSTB1 Open source 16Mhz 68k and AltRAM accelerator for the ST
Smalliermouse ST-optimised USB mouse adapter based on SmallyMouse2
FrontBench The Frontier: Elite 2 intro as a benchmark
Post Reply

Return to “3D MODELS”