I've been Coleco'd

Blogs & guides and tales of woo by forum members.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

stephen_usher wrote: Tue Oct 08, 2024 3:19 pm Or the -5V and 12V wasn't enough for the 4116 chips.
It was an issue when I replaced all of the 4116's so I think 5v is more likely, but now it's working fine I'm good :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

OK, so I started reassembling tonight and realised my plan to use the jack on the modulator wasn't going to work as the top case where the joysticks connect and are stored, will collide with the new cable I have.

So, I put the connectors on the bottom of the modulator board and it all seems to clear after a trial fit:

IMG20241008225555.jpg
IMG20241008225555.jpg (391.52 KiB) Viewed 110 times

And reassembly/testing is coming along nicely:

IMG20241008225824.jpg
IMG20241008225824.jpg (311.47 KiB) Viewed 110 times

I need to figure out what I'll use for strain relief for the AV cable coming out of the back, but that really is a small problem. I've used a simple ty-wrap around the cable before, so I'm sure that'll work again

What is amazing is the ColUSB power supply. This is it next to a 27C256 ROM chip:

IMG20241008230048.jpg
IMG20241008230048.jpg (63.71 KiB) Viewed 110 times

Considering it's a tiny little plug with a USB C connector and it's pumping out 12v, 5v and -5v you can colour me impressed. I may take the cover off to see how it's all done, but that'll be another night.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 1535
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: I've been Coleco'd

Post by HigashiJun »

@rubber_jonnie

Goods news !

:yay2:
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

Well, I had do do a bit more jiggling with the composite/audio out cables, but it's finally there and looks great :)

IMG20241010094057.jpg
IMG20241010094057.jpg (305.82 KiB) Viewed 70 times

All the visuals are great too:

IMG20241010094100.jpg
IMG20241010094100.jpg (322.76 KiB) Viewed 70 times
IMG20241010094117.jpg
IMG20241010094117.jpg (267.29 KiB) Viewed 70 times
IMG20241010094129.jpg
IMG20241010094129.jpg (281.38 KiB) Viewed 70 times
IMG20241010094206.jpg
IMG20241010094206.jpg (270.73 KiB) Viewed 70 times
IMG20241010094217.jpg
IMG20241010094217.jpg (283.63 KiB) Viewed 70 times

And the ColUSB is a little miracle:

IMG20241010094234.jpg
IMG20241010094234.jpg (296.64 KiB) Viewed 70 times

And inside it's quite amazing:

IMG20241010095856.jpg
IMG20241010095856.jpg (171.53 KiB) Viewed 70 times
IMG20241010095836.jpg
IMG20241010095836.jpg (160.91 KiB) Viewed 70 times

I may look for another controller, but not in a tearing hurry now. I think I'll look for an SD card cartridge and I like these: Atarimax Coleco Cart

I've bought from AtariMax before and Steve Tucker is a really nice guy, but it'll have to wait a bit as we have a lot of expense this month.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 1535
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: I've been Coleco'd

Post by HigashiJun »

Nice epilogue, even without the second controller.

The SD cart looks pretty good too.

:D
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

HigashiJun wrote: Thu Oct 10, 2024 11:01 am Nice epilogue, even without the second controller.

The SD cart looks pretty good too.

:D
Thanks :)

Yeah, Atarimax stuff is very nice, so unless I can find something a lot cheaper I'll go for that. Want something similar for the Intellivision too.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

So it seems there is a Megacart on PCBWay: Megacart

If it's cheap enough it may be worth giving a go if I can fit every last game onto the ROM :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 1535
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: I've been Coleco'd

Post by HigashiJun »

Nice find !

The guy who designed this PCB has also an interesting sound module for the Colecovision on PCBWay.
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 11600
Joined: Thu Aug 17, 2017 7:40 pm
Location: Essex
Contact:

Re: I've been Coleco'd

Post by rubber_jonnie »

HigashiJun wrote: Thu Oct 10, 2024 10:42 pm Nice find !

The guy who designed this PCB has also an interesting sound module for the Colecovision on PCBWay.
I saw that, yes, but I don't know how well used it is, but If I order the Megacart boards I may order some of those too.

I also found this for the Intellivision: Intellivision multi cart

Things are looking up :)
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
User avatar
HigashiJun
Posts: 1535
Joined: Fri Jun 19, 2020 7:21 am
Location: Tokyo

Re: I've been Coleco'd

Post by HigashiJun »

This PiRTOII looks also good, but to be honest, I do not much like Raspberry Pi powered gear in retro stuff.

It's just my opinion though...
Post Reply

Return to “MEMBER BLOGS”