I recorded today's siren test. Turns out it's a G Major chord.
The Cosmic Puppet's Universe.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
The Cosmic Puppet's Universe.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
Re: The Cosmic Puppet's Universe.
That is brilliant, I don't know much about music but it sounds nice to me
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
Re: The Cosmic Puppet's Universe.
Thanks. It basically means it's easy to incorporate into a composition. There's an interesting 'wind up' noise when the siren starts too.
It doesn't normally hold in that stuck position (that creates a chord). I wasn't expecting that.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
Re: The Cosmic Puppet's Universe.
I always wanted a way incorporate the YM2149F into music. Now I have a way.
I really like it mixed in with the bass, though I did that when working out Atlantic by Keane and don't wish to upload copyrighted material.
P.S. I don't now what the little button is for on top. It currently makes the sound stick.
Also need to get someone to shrink the tubing over it as I had to buy it chipless to have a YM2149F running it.
I really like it mixed in with the bass, though I did that when working out Atlantic by Keane and don't wish to upload copyrighted material.
P.S. I don't now what the little button is for on top. It currently makes the sound stick.
Also need to get someone to shrink the tubing over it as I had to buy it chipless to have a YM2149F running it.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
Re: The Cosmic Puppet's Universe.
Still finalising my setup of this, but this is every aspect achieved without PC now.
I plan to make some proper how to videos in the future when I have a capture card etc. Probably in the bleak mid-winter.
I plan to make some proper how to videos in the future when I have a capture card etc. Probably in the bleak mid-winter.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
Re: The Cosmic Puppet's Universe.
Okay, so I've been making a setup in Notator's RMG to manipulate and save the CATSKULL YM2149 sounds.
Been a while in the making as I had to take a break for my sanity.
Recent skintness due to buying a TASCAM Model 12 and the fact that I didn't notice the Import, Customs and VAT that was payable to UPS meant I've been mostly housebound and picked up this task again.
I found trying to decide how to lay it out a head fluff.
All that's left is for me to just double check I'm happy with everything and then make a brief video.
When that's done I'll also put up the Notator file that has everything saved and a txt file of the implimentation from the github and the setup I went for.
I've altered the order so that it works better left to right starting with the Synth type selection (1 - 7)
Man you can get some wacky sounds and recall them with a single click.
Been a while in the making as I had to take a break for my sanity.
Recent skintness due to buying a TASCAM Model 12 and the fact that I didn't notice the Import, Customs and VAT that was payable to UPS meant I've been mostly housebound and picked up this task again.
I found trying to decide how to lay it out a head fluff.
All that's left is for me to just double check I'm happy with everything and then make a brief video.
When that's done I'll also put up the Notator file that has everything saved and a txt file of the implimentation from the github and the setup I went for.
I've altered the order so that it works better left to right starting with the Synth type selection (1 - 7)
Man you can get some wacky sounds and recall them with a single click.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- PeckPeekPoke
- Posts: 68
- Joined: Tue May 25, 2021 7:52 pm
- Location: New England
Re: The Cosmic Puppet's Universe.
You've got a great setup there.
FOR GREAT JUSTICE. TAKE OUT EVERY ZIG
800xl+U1mb, STfm, STe, 030
800xl+U1mb, STfm, STe, 030
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
Re: The Cosmic Puppet's Universe.
Thanks. Spent the past 2 years on it.
On looking back I hadn't realised I'd got further on the whole chip setup. My SD card went down and confused things.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
RMG_EDITOR for CATSKULL YM2149 Synth
Sorry about the terrible picture quality!
Anyone with Notator can load this up and edit the CATSKULL YM2149 Synth.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.
- Cosmic Puppet
- Posts: 1689
- Joined: Fri Aug 02, 2019 1:03 am
- Location: West Yorkshire
- Contact:
MIDI Art
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 20211020, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.