I still see level shifters as active:
https://www.digikey.ch/en/products/deta ... GVR/725683

Very convenient to use.

We went through this in Switzerland a year or two ago. The next step is that the post office charges you if you didn’t fill in the digital one first and the post office employee looks very annoyed too!

I’ve got a few spare PSUs floating around…

mikro wrote: ↑Fri Jan 19, 2024 7:08 pm @foft you mentioned doing some adjustments, I guess making the spacing more aligned with PC world wasn't one of them?

No, the gerbers were just offset a lot which the board house didn’t like. I just removed the offsets and aligned them.

It’s ok for the Falcon alone +/- CT60. If using heavy peripherals then might need higher current.

Maybe you can ask Pavel (centuriotech) about this one? Seems like an interesting discovery. Forgot to post back here, I discussed this with Pavel at your suggestion and he is looking into it. He told me there is actually a wide trace of >50mil width of copper for 5V. Though the routing changed to a...

Today I tried to get my NetUSBee to work in 68060 mode, using the instructions from: https://www.atari-forum.com/viewtopic.php?p=434632#p434632 and https://www.atari-forum.com/viewtopic.php?p=436802#p436802 It works, but I used a 4.75V MCP101 which led to a discovery I didn't notice before. I'd been...

I found some of the Traco TOP 60316's here. One they had in stock and another from their supplier arrived a little later: https://www.reichelt.com/ch/en/switching-power-supply-open-frame-3-3-v-dc-5-2-v-dc-12-v-d-top-60316-p124942.html?&trstct=pos_0&nbc=1 Now if they can get more, I don't kno...

That pin is explicitly cut on my ct60, guess it’s normal.

I was wondering, is there a decent Falcon NVRAM test program? I gather the diagnostic card resets NVRAM but it only seems to have an RTC test, not an NVRAM test. Ending up with some NVRAM errors logged by TOS (with a decent battery) and I'm wondering if its because the content is bad or because it p...